The making process of badminton shuttlecock

Discussion in 'Shuttlecock' started by ningbo GIG, Mar 12, 2020.

  1. ningbo GIG

    ningbo GIG Regular Member

    Joined:
    Nov 13, 2014
    Messages:
    83
    Likes Received:
    4
    Occupation:
    owner of factory
    Location:
    China
    1. Badminton feathers return to the factory for grade sorting (Level 1; Level 2; Level 3; level 4)
    2.The computer is used to measure the camber and camber of the feathers to ensure the qualification rate of the stable flying badminton
    3.The ball head ensures the weight consistency of the finished ball by weighing the weight of the ball again
    4.After the measured feathers and the weighed ball head are matched accurately, the automatic ball inserting machine is equipped with the ball inserting device
    5.The assembled semi-finished ball shall be injected with primer to ensure that the root of the badminton shuttlecock has sufficient strength and can resist the external force of the chopping (proper glue shall be injected into the inner and outer rings)
    6.Wire binding for semi-finished ball and control the diameter of ball port (double wire binding at the same time)
    7.With the most advanced rolling technology, the polymer resin glue is fully pressed into the two coils, not only on the surface of the coils. In order to ensure the batting resistance of badminton is much better than other technological methods
    8.Check the flight stability of each ball with special ball testing machine to ensure that the flight stability standard is consistent with the level standard
     
  2. mbvolunteers

    mbvolunteers Regular Member

    Joined:
    Jul 16, 2012
    Messages:
    19
    Likes Received:
    0
    Location:
    mississauga
    Very cool, thank you.
     
  3. Alexander Karpov

    Alexander Karpov New Member

    Joined:
    Mar 20, 2019
    Messages:
    7
    Likes Received:
    1
    Location:
    Russia
    Hi. What device should I use to measure speed of shuttle?
     
  4. ningbo GIG

    ningbo GIG Regular Member

    Joined:
    Nov 13, 2014
    Messages:
    83
    Likes Received:
    4
    Occupation:
    owner of factory
    Location:
    China
    which brand you use now ?
     

Share This Page