Separate names with a comma.
as i'm stringing at 26/28 i'll up the 28 to 29:p
are you asking if i added two pounds to the cross
I've strung my nanos with single and double, and haven't noticed any difference. One possible pro for single stringing, when a string breaks the...
One point you should consider. The time it takes to string a racquet without cutting any corners, really doesn't make it financially worthwhile....
I use an old Ektelon H with two flying clamps, and i've looked at newer machines and stayed with the Ektelon. This machine is so solid and easy to...
Cut the end of the string at 45 degrees with a sharp pair of scissors, and make sure it's fresh not crumpled. Use a pair of small smooth jawed...
I strung mine to 26/28 with no probs at all.
Had another session with the as7 wednesday night, and it definately feels weak compared to the 9000x.
It's priced at the nano 9000 level in the uk, so i would expect it to compare at that level, time will tell.:)
used mine today, distinct lack of power compared to the 9000x. Going to give it another go wednesday.
i've strung several 9000x at 26 x 28 on an 2 point machine (ektelon h). There's only been minimal deflection when stringing and no probs with...
You could also make a centre lug to sit around the clamp pin, which bridges the distance to the frame giving it suppport.
Just noticed it looks like the mounting posts have holes where the lugs sit. No problems there, just makes the job a little more work. You'll need...
Theres a pretty simple cure to get 12 and 6 o'clock support on this machine. Buy some flat plastic sheet the same thickness as the original white...
i've got some bg80 of ebay, from overseas. Two packets have the yonex oval hologram label in the upper right front, and the other three have a...
I've just picked up a new (250573uk) nanospeed 9000x, and the stringing instructions sheet states the crosses start at the bottom (B6), rather...
It's a molybdenum based oil that you spray on.
If it's underneath and out of the way i would use a bit of vaseline or dry oil.
hi could you check this one for me. ---->8---- cut here (include this line) ---->8---- racket model: Yonex nano 9000x shaft serial: 6112613 cone...
ps. what are the differences on a jp raquet to a uk one. I still have my old cracked uk raquet. PM if details are sensitive.