Separate names with a comma.
Hi Kevin, assuming the PS3600 has not changed its technical specs since 2013, then answer is a straight forward plug and play and you do not need...
sorry item sold.
Mark is right, having 2 pads introduces more unwanted flex during tensioning. Also if the black pad is at 12 clock you will not get enough...
You need the aerocover because when wind blows at Cat3 speed you are still able to do stringing comfortably... Anyway nice protechs!!
Wow just back from vacation and seeing a lot of posts... i agree grommet conditions r the ones stopping me to go higher... some badly scuffed-up...
I can courier the copper pipe to you. Probably you send me your address via pm.
Yes the regular copper tube. ;)
Final assembly, I still need to cut 10mm off the original toyozouki so the top of the clamp does not clash with the support posts. Oh, just for...
Hi Yan.v I found the solution. Went for a hardware shopping spree over the weeked. Found a 0.5 inch about 12.70mm copper tube, the inner diameter...
Hi, I've recently upgraded my machine. Due to insufficient space I'm selling away my Premium Stringer Dropweight + Premium Stringer Stand + Wise...
Adjust your top L throat to its max so the top side support will be able to position higher... pls read up s_mair's post above he has extracted...
Sure yan.v not easy 2 find though... will let u know
Yesir, I plan on doing that... I'm now looking towards getting a 12.40mm outer diameter x 0.30mm thickness sleeve x 6 cm length... will improvise...
Hey mate, my apology I should have been more precise, toyozouki does releases the clamp bases alright, but the toyozouki stem (rod) is roughly...
Lol and thanks s_mair and Kwun.
The top side supports looks bit too low... What stringing method you do? Top-down? Bottom-up?
