Separate names with a comma.
I haven’t check in here in a while. Nice to see there are some new solutions to make life easier with the Wise 2086! I’ve been enjoying my...
I usually avoid judging other stringers, but rather share some observations from looking at those pics that nobody pointed out previously. Unless...
Thanks for sharing. My only critiques: (1) Knots at shared holes? A big NO-NO for me. Not following YY's recommendation for this racket. (2)...
Might be side supports too tight. If it's already elongated and more narrow, imagine what will happen if you break a main near the top and the...
Thanks for the recommendation @s_mair . That thread refers to my original switch. Updated version can be seen in action here: [MEDIA]
I can confirm this. Was expecting two LD-Force as a sponsored player, received two ZF2 LD-Legends from Yonex Canada instead.
Good catch, thanks for the correction. My point was there are 2 revisions of side supports for this machine.
You'll need the Wise dropweight adapter plate, and drill an additional hole to line up with the 2 threaded holes on the X-6FC.
Great feedback @s_mair Gamma X-6FC is a great value. I have this machine, with one Gamma badminton-specific main support (for 12 o'clock only),...
There are 2 versions of supports for the Gamma, the older K (or L) supports and the newer V-style ones. Only the newer V-Style supports have the...
Anybody know which black shoes are these?
No experience with the 3Us, but if you were struggling with racket speed with the ZF2 3U, I suspect it would be same with the LDF.
@garra to answer your questions regarding comparison to ZF2 4U, I shared my feedback on this earlier in this thread, in my opinion it feels just...
Which machine are you currently using?
Looks great! Loving the streamlined look of the updated Wise diablo compared to the older ones like mine. I am curious to hear your feedback on...
The Watdon badminton clamps are also a great value. I can't find the old ones I bought back then with the black handle, but similar to these:...
Indeed this is a great place to discuss and share ideas in a civil manner, a place where we all want to help each other. I've been an observer...
Nice work on your switch, nice to see different mounting solutions, looks pretty tricked out. Does string occasionally get caught in those gaps?...
Good work on your design, from the pics it definitely looks beefier than the second one on Thingiverse. Do you print them with PLA or ABS? You're...
I had up to five 4U-G5 ZF2's in my bag, a mix of black, LD-white and LD-yellow. All of them varied a bit, including multiple black ones in terms...