Hello All, I recently bought a stringing machine. stupid idea maybe :::: I have a big problem, the rope slips from the gripper. This one: I try to limit the space in the gripper but it still slips or damage the string (BG 66 Ultimax...) This is the first time I use it, may be I should clean more the pieces of metals The stringing machine is not new and I think stored for a long time in a garage ( a little bit rusted ) My question: The two parts metals in the gripper should be rough or smooth ? I see also many people talking about business card. Should I replace the two pieces of metal in the gripper by a business card ? Thank you for the advice Sorry for my English, non-native language...
I have a similar machine and don't have any slipping problems, even with ZyMax62. However I don't use the ratcheting function, I started stringing on a non-ratcheting machine and basically use the Gamma similarly. The Gamma manual will instruct based on the ratcheting mode. Are you using the ratcheting method or non?
Thanks a lot ! I Understood , the small part of the gripper was too press. I release the screw and now it's working well. Stupid thing.... I can string now my first racquet