Badminton Central Guide to Stringing Tools

Discussion in 'Badminton Stringing Techniques & Tools' started by kwun, Apr 10, 2012.

  1. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    You can use it on the crosses but with the mains it needs a bit of a push, so I don't do it there.

    And my own PP bases did need a bit of a tighten every once in a while.
     
  2. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    All things being equal the clamp is more important - that's the thing that's touching the string.
    The PP ones aren't even in the same street as these - tooth gap, diamond dust, handle action... better in every conceivable way.
     
  3. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    The tubes on those seem shorter than on mine but that could be because the locking handle is so much fatter.
    If the prices are roughly equal I would go with the PP's just because you'd get them sooner and it'd be easier to sort out any issues with a UK seller (especially W&D, who are excellent).
     
  4. yippo888

    yippo888 Regular Member

    Joined:
    Dec 7, 2004
    Messages:
    454
    Likes Received:
    61
    Occupation:
    Therapy Radiographer
    Location:
    Nr Guildford, England
    As long as the new clamps fit on them....
     
  5. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    You'd have to get 12.2 mm clamps, but he's got them;).

    I had to jump through some serious hoops to get my old 12.0 PP's to fit - a lathe was involved.
     
  6. yippo888

    yippo888 Regular Member

    Joined:
    Dec 7, 2004
    Messages:
    454
    Likes Received:
    61
    Occupation:
    Therapy Radiographer
    Location:
    Nr Guildford, England
    do you mean get the AEF clamps in 12.0mm Mark?

    the pros pro swivel base is advertised as being compatible with 12.0mm clamps
     
  7. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    You can get the AEFs in either size. The bases over here are all 12.0 mm, but the auto-lockers are 12.2.
     
  8. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
  9. dbswansea

    dbswansea Regular Member

    Joined:
    Mar 7, 2012
    Messages:
    2,525
    Likes Received:
    153
    Occupation:
    IT
    Location:
    Swansea
  10. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    An update on those Gamm-esque clamps, my 32/33 jobs with LN#1 have gone from 1410-20 to 1460-70 off the machine (and during the AE I had to switch back to my old clamps and noticed the drop).

    Worth it.
     
    s_mair likes this.
  11. FeatherBlaster

    FeatherBlaster Regular Member

    Joined:
    Mar 23, 2014
    Messages:
    920
    Likes Received:
    323
    Location:
    Denmark
  12. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    I would, but I only used one; the bottom of the turntable hub is wide enough to act as a washer.
     
    FeatherBlaster likes this.
  13. Gavin97

    Gavin97 Regular Member

    Joined:
    Apr 11, 2013
    Messages:
    144
    Likes Received:
    12
    Location:
    Thame
    Does the Ali express website come as a pair or just 1 each?


    Sent from my iPhone using Tapatalk
     
  14. Desmond C

    Desmond C Regular Member

    Joined:
    Jun 10, 2011
    Messages:
    188
    Likes Received:
    14
    Location:
    Mississauga, Ontario
    What is the length of the shaft on these clamps?
     
  15. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    Only just long enough to work the auto-unlock without hitting the top of the tube. Very little tolerance.
     
  16. Desmond C

    Desmond C Regular Member

    Joined:
    Jun 10, 2011
    Messages:
    188
    Likes Received:
    14
    Location:
    Mississauga, Ontario
    Do you think you could measure it for me? I want to make sure that they wouldn't hit my supports on the Ghost 2.
     
  17. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    Pair.
     
  18. Mark A

    Mark A Regular Member

    Joined:
    Sep 2, 2005
    Messages:
    7,170
    Likes Received:
    695
    Location:
    St Helens, UK
    72 mm.
     
    Desmond C likes this.
  19. yippo888

    yippo888 Regular Member

    Joined:
    Dec 7, 2004
    Messages:
    454
    Likes Received:
    61
    Occupation:
    Therapy Radiographer
    Location:
    Nr Guildford, England
    just got the pros pros automatic swivel clamps v2 :) really nice. glad i went for the upgrade. much smoother than the stock one, hopefully wont get loose as much and require as much adjusting.
     
  20. Gavin97

    Gavin97 Regular Member

    Joined:
    Apr 11, 2013
    Messages:
    144
    Likes Received:
    12
    Location:
    Thame

Share This Page